How To Create A WI-Fi Jammer By HackNet

How To Create A WI-Fi Jammer By HackNet.

This Guide Will Explain How To Create A Wi-Fi Jammer Affordable And Functional, For More Information On The Functioning And Use To Watch The Videos On The YouTube Channel Of Hacknet.

Requirements:

• Computer
• Node MCU
• The File .Bin
• Source of Energy (Ex: Power bank) 
• Tab Esp8266
• Micro USB Cable

Configuration Guide:

• Download the Necessary Files (Linked at the Bottom of the Post).
• Connect The Board Esp8266 To The PC With The Micro USB Cable.
• Open Node MCU And Select The Item "COM Port" To "COM6"(May Vary Depending On The Coupon, Generally Is Never COM1).
• From Node MCU navigate to "Config" And Pressing the First Gear to the Right; Select the Location Where You Saved the File .Bin.
• From Node MCU Switch To "Advanced" And "Flash Speed" Select The "80 MHz".
• From Node MCU Scroll to "Operation" And Press "Flash (F)".

Coupon Configured With Success.

Guide To Use:

• Connect The Board To A Power Source.
• Connect Any Device To Wi-Fi Created By The Board.
• SSID (Default): Pwned
• Password (Default): Deauther
• Access to the Browser on the Device and Connect To the IP "192.168.4.1".
• Access to Run Properly. From This Point on Is Very Intuitive To Use, For More Info, Watch the Video on the YouTube Channel of Hacknet.

Necessary Links:

• Card Esp8266 :- http://amzn.to/2yefQ0T
• Node MCU (32-Bit) :- http://bit.ly/NodeMCU32
• Node MCU (64-Bit) :- http://bit.ly/NodeMCU64
• File .Bin :- http://bit.ly/FileBinJammer

SHARE BY GK

Computer Knowledge